Click to view the relevant product information containing the corresponding elements

Ketai new materials can provide customization of any combination of materials with almost all elements (except radioactive elements) in the "yuansuo periodic table". Some products have not been updated in time. Please consult customer service for special customization needs.

TECHNICAL SUPPORT

current location:Home >> Service >> Analysis and detection

ANALYSIS AND DETECTION

  • metallurgical microscope

    It adopts the world's best infinite dual color correction and contrast enhancement (ICCs) optical system to provide users with the sharpest images. Five kinds of upper parts, three kinds of lower parts and two columns can be combined flexibly according to the requirements of material testing and economic cost, and the analysis of transparent materials, opaque materials and fluorescent materials can be realized.

  • ICP-OES

    High efficiency and stability, continuous and rapid multi-element determination with high accuracy. When the central gasification temperature is up to 10000K, the sample can be fully gasified with high accuracy. The working curve has a good linear relationship and a wide linear range. Combined with computer software, the full spectrum direct reading results are convenient and fast.

  • chemical analysis

    Chemical analysis can be divided into titration analysis and gravimetry according to the different operation methods. Gravimetric analysis method is suitable for constant analysis with the content of the component to be measured greater than 1%, which is characterized by high accuracy. Therefore, this method is often used for arbitration analysis, but the operation is troublesome and time-consuming.

  • Oxygen nitrogen meter

    The oxygen and nitrogen analyzer can decompose the sample by pulse heating in an inert atmosphere, and the oxygen and nitrogen contents in various steel, non-ferrous metals and new materials can be determined by non decomposition infrared detector and thermal conductivity detector respectively. Measurement range: oxygen 0.1-1000ppm; Nitrogen 0.1-5000ppm, analysis time: 3min for each sample

  • metallurgical microscope

  • ICP-OES

  • chemical analysis

  • Oxygen nitrogen meter

TEST ITEMS

  • XPS

  • TXRF

  • XRF

  • XRR

  • XRD

  • ICP-OES

  • ICP-MS

  • GDMS

  • EDS

TECHNICAL SERVICE

  • 1. Reduction, purification, casting and processing of rare earth metals;
  • 2. Purification, melting, casting, hot and cold processing and machining of single metal;
  • 3. Alloy melting, casting molding, hot and cold processing, machining;
  • 4. Forming, hot and cold processing and machining of superalloys;
  • 5. Melting, molding, hot and cold processing and machining of high-purity materials;
  • 6. Cutting and precision machining of various materials;
  • 7. Synthesis of semiconductors, sulfides, selenides, tellurides, phosphates, arsenides, antimonides;
  • 8. Synthesis of various high-purity oxides, fluorides, nitrides, silicides, carbides and borides;
  • 9. Synthesis of various salts, titanate, zirconate, aluminate, silicate, cobaltate, ferrite;
  • 10. Molding of special ceramics, compound semiconductors and salts;
  • 11. Synthesis, molding and precision processing of special functional materials;
  • 12. Coating service

TECHNICAL CONSULTATION

name:

tel:

demand: